Features:
- Steel enclosure
- Liquid cooled engine produces more electricity for longer outages
- Whisper-Test™: Patent-pending, self-test feature makes the GUARDIAN Elite 50% quieter during the generator’s weekly self-test cycle
- Longest life expectancy in the industry: Over 3,000 hours of run time
- Superior Paint: Tough, textured powder coat finish for unmatched durability and all weather protection
- UL listed
- Clean burning fuel: Natural gas or liquid propane vapor
Generator Specifications:
- Rated Power LPG (kW): 130
- Rated Power NG (kW): 130
- Amps @ 240V, 1 Phase: 542
- Amps @ 208V, 3 Phase: 451
- Amps @ 480V, 3 Phase: 195
- Voltage @ 60 Hz: (120/240, 1 Phase), (120/208, 3 Phase), (277/480, 3 Phase)
- Phase: Single and Three Phase
- Frequency: 60 Hz
- Engine/Alternator RPM: 3000/1800
- Engine: 6.8L V-10
- Fuel: Natural Gas or Liquid Propane Vapor
- Fuel Consumption LP (cu.ft/hr)/(gal/hr): 719/19.8
- Fuel Consumption NG (cu.ft/hr): 1786
- EPA CARB Certified: NO
- Engine Cooling: Liquid
- Controls: H-100
- UL 2200 (US and Canada): YES
- Main Line Circuit Breaker: 600,500,225 Amp
Automatic Transfer Switch (HTS-N) Features:
- Single coil design, electrically operated and mechanically held
- Programmable exercise time
- SPDT aux contacts
- Main contacts are silver alloy
- Conformal coating protects the printed circuit board
- UL 1008 listed
- Indicating LED's for switch position, standby operating, and utility available
- 3 positions test switch: Fast test, auto, normal test
- Arc chutes on main contacts
- Signal before transfer contacts
- Rated to all classes of loads
- Remote start, stop and transfer through GenLink Communications Software
100 Amp Automatic Transfer Switch (HTS-N) Specifications:
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neutral
- Terminal Lug Wire Contact Terminals: 2/0 - 14 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 14,000
- Maximum Fuse Size: 200 Amps
- Fuse Class: J, T
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neutral
- Terminal Lug Wire Contact Terminals: 400MCM - 4 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 25,000
- Maximum Fuse Size: 400 Amps
- Fuse Class: J, T
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neutral
- Terminal Lug Wire Contact Terminals: 400MCM - 4 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 25,000
- Maximum Fuse Size: 400 Amps
- Fuse Class: J, T
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neurtal
- Terminal Lug Wire Contact Terminals: 600MCM - 4 AWG or (2)250MCM-1/0 AWG
- Number of Lugs: 4
- Maximum RMS Symmetrical Faul Current: Fuse - 200,000 Amps, Circuit Breaker - 35,000
- Maximum Fuse Size: 600 Amps
- Fuse Class: J, T
- Designed to operate in conjunction with the Generac H100 Series generator controller
- 2-wire RS485 communication link to the generator controller
- Switch operation is instigated by the generator controller
- All timers and voltage set points are programmable through GenLink Communications Software
- Standby Accept Voltage: 85-95%
- Standby Accept Frequency: 85-95%
- Nominal Voltage: 1 Volt Increments
- Allowable Deviation of Utility: 1 - 100%
- Line Interruption Delay: 1 - 10 seconds
- Engine Warmup Time: 1 - 300 seconds
- Minimum Run Time: 5 - 60 min.
- Return to Utility Timer: 1 - 30 min.
- Engine Cooldown Timer: 1 - 30 min.
- Signal Before Transfer Timer: 1 - 30 sec.
- Transfer Type: Inphase Time Delay Neurtal
- Terminal Lug Wire Contact Terminals: 600MCM - 4 AWG or (2)250MCM-1/0 AW
See Similar Products:
- View more products from : Generac
- View more : Standby Generators
Dimensions & Weights
Item: |
Dimensions: |
Weight: |
|---|---|---|
| 130 kW Generac Liquid-Cooled Generator, CSA, SCAQMD, EPA Compliant in Steel | 54.8" H x 36.8" W x 115.2" D | 2873 lbs |
| 100 Amp Automatic Transfer Switch (HTS-N) | 36" H x 24" W x 10" D | 180 lbs |
| 150 Amp Automatic Transfer Switch (HTS-N) | 36" H x 24" W x 10" D | 185 lbs |
| 200 Amp Automatic Transfer Switch (HTS-N) | 36-48" H x 24-30" W x 10-12" D | 185-265 lbs |
| 300 Amp Automatic Transfer Switch (HTS-N) | Unavailable | 245-325 lbs |
| 400 Amp Automatic Transfer Switch (HTS-N) | Unavailable | 245-325 lbs |
| 600 Amp Automatic Transfer Switch (HTS-N) | Unavailable | 650 lbs |
| 800 Amp Automatic Transfer Switch (HTS-N) | Unavailable | 650 lbs |
Generac:
Since 1959, Generac Power Systems, Inc. has been a leading, innovative manufacturer and marketer of portable and standby generators, automatic transfer switches, modular paralleling systems, and small engines for recreational vehicle, residential, and commercial applications. Generac’s power systems range in output from 2 to 9,000 kilowatts.
World class manufacturing is dynamic. To sustain one's reputation as a trailblazer, one must accept change. Generac views change as opportunity, and opportunity is the motivation that drives our workforce to succeed. Generac employees are encouraged to be imaginative... in their suggestions to improve efficiencies, in their desire to incorporate new technologies and in their quest to broaden their contributions.
This willingness and ability to achieve at an elevated level defines Generac's culture and is most easily seen in the products they build. That's why Generac Power Systems remains the undisputed leader in the residential market. Today, Generac sells more automatic home standby generators than all of our competitors combined.
It is also why Generac revolutionized the commercial market, by creating the first product line geared specifically to the needs of small and mid-sized businesses.
Generac is the company that recognized the demand for industrial power solutions that boast redundancy, reliability, and flexibility. In response, Generac has created numerous award-winning products, relying on creativity and innovation to see them through.
And Generac is the company that was chosen above all others to supply back-up power to the nation's largest telecommunications networks.
Generac Power Systems is proud to be a multiple recipient of Milwaukee Magazine's "Best Places to Work" award for Southeastern Wisconsin.
Since 1959, Generac Power Systems, Inc. has been a leading, innovative manufacturer and marketer of portable and standby generators, automatic transfer switches, modular paralleling systems, and small engines for recreational vehicle, residential, and commercial applications. Generac’s power systems range in output from 2 to 9,000 kilowatts.
World class manufacturing is dynamic. To sustain one's reputation as a trailblazer, one must accept change. Generac views change as opportunity, and opportunity is the motivation that drives our workforce to succeed. Generac employees are encouraged to be imaginative... in their suggestions to improve efficiencies, in their desire to incorporate new technologies and in their quest to broaden their contributions.
This willingness and ability to achieve at an elevated level defines Generac's culture and is most easily seen in the products they build. That's why Generac Power Systems remains the undisputed leader in the residential market. Today, Generac sells more automatic home standby generators than all of our competitors combined.
It is also why Generac revolutionized the commercial market, by creating the first product line geared specifically to the needs of small and mid-sized businesses.
Generac is the company that recognized the demand for industrial power solutions that boast redundancy, reliability, and flexibility. In response, Generac has created numerous award-winning products, relying on creativity and innovation to see them through.
And Generac is the company that was chosen above all others to supply back-up power to the nation's largest telecommunications networks.
Generac Power Systems is proud to be a multiple recipient of Milwaukee Magazine's "Best Places to Work" award for Southeastern Wisconsin.
General Shipping Information:
A freight carrier delivers this item. We call it “Self Service” because you’ll need to move the package off of the truck yourself. You may want a friend or family member on hand for help.
Liftgate Services:
Standard “Self-Service” Truck Delivery requires you to move your items off the truck without any help. For only $50, our delivery service partners can be contracted to perform “Liftgate Services”, and bring the item(s) to the ground for you. One “Liftgate Services” fee of $50 will include all the items in your cart.
Delivery Notes:
- Shipping EstimateView
- Stock Status:View
- Ships to:
- Ship Method:Truck Freight Delivery
- Upgrade Available? No
- Shipping Restrictions: None
Truck Freight Delivery Additional Information:
Self-Service Truck Delivery:A freight carrier delivers this item. We call it “Self Service” because you’ll need to move the package off of the truck yourself. You may want a friend or family member on hand for help.
Liftgate Services:
Standard “Self-Service” Truck Delivery requires you to move your items off the truck without any help. For only $50, our delivery service partners can be contracted to perform “Liftgate Services”, and bring the item(s) to the ground for you. One “Liftgate Services” fee of $50 will include all the items in your cart.
Delivery Notes:
- Once your order is near, a rep from the shipping company will call and give you a 4-hour window to arrange for delivery.
- Sometimes freight carriers offer their own services. Once we send you your tracking info, you can call the carrier directly to get more info.
For Your Reference
OUR SKU # GDN1045
This item is also sometimes listed under the following manufacturer numbers:
HTSN100A1, HTSN100A3, HTSN100G1, HTSN100G3, HTSN100K1, HTSN100K3, HTSN150A1, HTSN150A3, HTSN150G1, HTSN150G3, HTSN150K1, HTSN150K3, HTSN200A1, HTSN200A3, HTSN200G1, HTSN200G3, HTSN200K1, HTSN200K3, HTSN300A1, HTSN300A3, HTSN300G1, HTSN300G3, HTSN300J1, HTSN300J3, HTSN300K1, HTSN300K3, HTSN400A1, HTSN400A3, HTSN400G1, HTSN400G3, HTSN400J1, HTSN400J3, HTSN400K1, HTSN400K3, HTSN600A3, HTSN600A4, HTSN600G3, HTSN600G4, HTSN600K3, HTSN600K4, HTSN800A3, HTSN800A4, HTSN800G3, HTSN800G4, HTSN800K3, HTSN800K4, QT13068C
HTSN100A1, HTSN100A3, HTSN100G1, HTSN100G3, HTSN100K1, HTSN100K3, HTSN150A1, HTSN150A3, HTSN150G1, HTSN150G3, HTSN150K1, HTSN150K3, HTSN200A1, HTSN200A3, HTSN200G1, HTSN200G3, HTSN200K1, HTSN200K3, HTSN300A1, HTSN300A3, HTSN300G1, HTSN300G3, HTSN300J1, HTSN300J3, HTSN300K1, HTSN300K3, HTSN400A1, HTSN400A3, HTSN400G1, HTSN400G3, HTSN400J1, HTSN400J3, HTSN400K1, HTSN400K3, HTSN600A3, HTSN600A4, HTSN600G3, HTSN600G4, HTSN600K3, HTSN600K4, HTSN800A3, HTSN800A4, HTSN800G3, HTSN800G4, HTSN800K3, HTSN800K4, QT13068C
Related Items
Call us anytime at (866) 263-8325, Mon-Fri 8-9, Sat and Sun 9-6 EST
Teak, Wicker and More, a division of Wayfair LLC, 177 Huntington Avenue, Suite 6000, Boston, MA 02115
Copyright 2002 - 2012 by Teak, Wicker and More, a division of Wayfair LLC. All rights reserved. Terms of Use
International: Canada | United Kingdom | Germany
Customer Reference Number:
